Das betrifft ja leider nur die internen platten 
Wie (gut) gehts euren Festplatten
-
-
Typisch ocz
-
Hauptrechner:
HTPC:
FSC Scenic N600:
-
-
Samsung SpinPoint Voyager 3A Series VA34323A:
Code
Alles anzeigensmartctl 5.41 2011-03-16 r3296 [i686-pc-linux-gnu-2.6.38-grml] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: SAMSUNG VA34323A Serial Number: ST88134010ffffff3be3 Firmware Version: HA100-25 User Capacity: 4.324.561.920 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 4 ATA Standard is: ATA/ATAPI-4 X3T13 1153D revision 7 Local Time is: Wed Jan 27 19:54:16 2016 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: FAILED! Drive failure expected in less than 24 hours. SAVE ALL DATA. See vendor-specific Attribute list for failed Attributes. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Total time to complete Offline data collection: ( 180) seconds. Offline data collection capabilities: (0x0f) SMART execute Offline immediate. Auto Offline data collection on/off support. Abort Offline collection upon new command. Offline surface scan supported. No Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x00) Error logging NOT supported. No General Purpose Logging support. SMART Attributes Data Structure revision number: 6 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 253 253 127 Pre-fail Always - 48 4 Start_Stop_Count 0x0032 241 253 127 Old_age Always - 4795 5 Reallocated_Sector_Ct 0x0033 251 253 027 Pre-fail Always - 1 7 Seek_Error_Rate 0x000b 253 253 127 Pre-fail Always - 0 197 Current_Pending_Sector 0x0032 253 253 027 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 253 253 027 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000b 200 200 000 Pre-fail Always - 9 200 Multi_Zone_Error_Rate 0x0032 253 253 102 Old_age Always - 149791 201 Soft_Read_Error_Rate 0x000b 253 253 127 Pre-fail Always - 0 202 Data_Address_Mark_Errs 0x000b 049 253 127 Pre-fail Always FAILING_NOW 48 203 Run_Out_Cancel 0x000b 253 253 128 Pre-fail Always - 48 204 Soft_ECC_Correction 0x000b 253 253 127 Pre-fail Always - 48 SMART Error Log not supported SMART Self-test Log not supported Device does not support Selective Self Tests/LoggingSchaut nicht gut aus
Fehler bei Badblocks ab etwa 90 % beim 1. Lesedurchgang Vor Badblocks waren bei den IDs #5, 202, 203 und 204 noch "0" als Werte drin.Ich find's ja putzig, dass die Platte erst beim Unterschreiten vom Grenzwert von ID #202 gemeint hat, dass der SMART-Selbsttest fehlgeschlagen ist - und sie nun binnen 24 Stunden ausfallen könnte ("Drive failure expected in less than 24 hours. SAVE ALL DATA.").
-
Code
Alles anzeigensmartctl 5.41 2011-03-16 r3296 [i686-pc-linux-gnu-2.6.38-grml] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Blue EIDE family Device Model: WDC WD1600AAJB-22WRA0 Serial Number: WD-WCAS2A259823 Firmware Version: 58.01H58 User Capacity: 160.041.885.696 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Sun Feb 7 10:16:16 2016 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: FAILED! Drive failure expected in less than 24 hours. SAVE ALL DATA. See vendor-specific Attribute list for failed Attributes. General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 4380) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 55) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x203f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 040 040 051 Pre-fail Always FAILING_NOW 122987 3 Spin_Up_Time 0x0003 156 156 021 Pre-fail Always - 3175 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 404 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x000e 200 200 051 Old_age Always - 0 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 786 10 Spin_Retry_Count 0x0012 100 100 051 Old_age Always - 0 11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 402 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 36 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 404 194 Temperature_Celsius 0x0022 110 094 000 Old_age Always - 33 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 181 181 000 Old_age Always - 500 198 Offline_Uncorrectable 0x0010 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 100 253 051 Old_age Offline - 0 SMART Error Log Version: 1 ATA Error Count: 4298 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4298 occurred at disk power-on lifetime: 786 hours (32 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 06 8a 23 94 e9 Error: UNC 6 sectors at LBA = 0x0994238a = 160703370 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 88 23 94 09 08 1d+12:11:05.958 READ DMA 27 00 00 00 00 00 00 08 1d+12:11:05.958 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 00 0a 1d+12:11:05.951 IDENTIFY DEVICE ef 03 45 00 00 00 00 0a 1d+12:11:05.951 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 08 1d+12:11:05.951 READ NATIVE MAX ADDRESS EXT Error 4297 occurred at disk power-on lifetime: 786 hours (32 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 06 8a 23 94 e9 Error: UNC 6 sectors at LBA = 0x0994238a = 160703370 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 88 23 94 09 08 1d+12:11:02.872 READ DMA 27 00 00 00 00 00 00 08 1d+12:11:02.856 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 00 0a 1d+12:11:02.850 IDENTIFY DEVICE ef 03 45 00 00 00 00 0a 1d+12:11:02.850 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 08 1d+12:11:02.850 READ NATIVE MAX ADDRESS EXT Error 4296 occurred at disk power-on lifetime: 786 hours (32 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 06 8a 23 94 e9 Error: UNC 6 sectors at LBA = 0x0994238a = 160703370 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 88 23 94 09 08 1d+12:10:59.927 READ DMA 27 00 00 00 00 00 00 08 1d+12:10:59.927 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 00 0a 1d+12:10:59.921 IDENTIFY DEVICE ef 03 45 00 00 00 00 0a 1d+12:10:59.921 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 08 1d+12:10:59.921 READ NATIVE MAX ADDRESS EXT Error 4295 occurred at disk power-on lifetime: 786 hours (32 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 06 8a 23 94 e9 Error: UNC 6 sectors at LBA = 0x0994238a = 160703370 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 88 23 94 09 08 1d+12:10:57.002 READ DMA 27 00 00 00 00 00 00 08 1d+12:10:57.002 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 00 0a 1d+12:10:56.996 IDENTIFY DEVICE ef 03 45 00 00 00 00 0a 1d+12:10:56.996 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 08 1d+12:10:56.996 READ NATIVE MAX ADDRESS EXT Error 4294 occurred at disk power-on lifetime: 786 hours (32 days + 18 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 06 8a 23 94 e9 Error: UNC 6 sectors at LBA = 0x0994238a = 160703370 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 88 23 94 09 08 1d+12:10:54.077 READ DMA 27 00 00 00 00 00 00 08 1d+12:10:54.077 READ NATIVE MAX ADDRESS EXT ec 00 00 00 00 00 00 0a 1d+12:10:54.070 IDENTIFY DEVICE ef 03 45 00 00 00 00 0a 1d+12:10:54.070 SET FEATURES [Set transfer mode] 27 00 00 00 00 00 00 08 1d+12:10:54.070 READ NATIVE MAX ADDRESS EXT SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.Die ist wohl im Anus. badblocks lief seit über 36 Stunden, und war erst beim ersten von vier Lesedurchgängen - und da gerade mal bei reichlich 51% angelangt. Was ich interessant finde: Die Anzahl der Current Pending Sectors geht beständig nach oben - bei den Reallocated Sectors Count tut sich aber nicht. Startet man badblock neu, ist auf einmal der Roh-Wert bei den Current Pending Sectors wieder auf "0"
-
Auslesefehler seitens des Programms?
-
Nö, glaube ich nicht. Ist vermutlich Taktik der Firmware. Ich hatte ja gehofft, dass die Fehler irgendwann mal aufhören und der zweite Schreib/Lesedurchgang kommt, aber ich hab' keine Lust, noch weitere 36 Stunden zu warten, ehe die Festplatte mit dem ersten Durchgang fertig ist. So fliegt die in die Tonne und fertig. Hab' ja einige Festplatten, die in die Richtung wandern.
-
schon seltsam, sicher kein busfehler?
-
Das betrifft ja leider nur die internen plattenWenn die nicht als Wechselmedium angezeigt sondern als internes Laufwerk, dann bleibt die auch mit an. Zumindest bei meiner WD so.
-
schon seltsam, sicher kein busfehler?Ziemlich sicher. Die selbe Konstellation aus Mainboard und IDE-Kabel lief bei rund einem Dutzend anderen Festplatten (von 'ner 250 GB Samsung bis zu 'ner 40 GB Samsung runter) ohne Probleme - nur bei dieser WD1600AAJB nicht. Also würde ich schon auf die Platte selbst tippen. Das Kabel steckt auch fest dran. Wenn Bus-Problem, dann kann das ja fast nur auf dem Board der Platte sein.
-
Vier funktionierende Todessterne:
IBM DTLA-305030
Spoiler anzeigen
Code
Alles anzeigensmartctl 5.41 2011-03-16 r3296 [i686-pc-linux-gnu-2.6.38-grml] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: IBM Deskstar 40GV & 75GXP series (A5AA/A6AA firmware) Device Model: IBM-DTLA-305030 Serial Number: YG0YGL68185 Firmware Version: TW3OA6AA User Capacity: 30.738.677.760 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 5 ATA Standard is: ATA/ATAPI-5 T13 1321D revision 1 Local Time is: Mon Feb 22 10:25:32 2016 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 1985) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 22) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 098 098 060 Pre-fail Always - 65539 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Spin_Up_Time 0x0007 100 100 024 Pre-fail Always - 0 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 3 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 11 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline - 0 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 3 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3 192 Power-Off_Retract_Count 0x0032 100 100 050 Old_age Always - 3 193 Load_Cycle_Count 0x0012 100 100 050 Old_age Always - 3 194 Temperature_Celsius 0x0002 144 144 000 Old_age Always - 38 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 11 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Device does not support Selective Self Tests/LoggingIBM DTLA-307030
Spoiler anzeigen
Code
Alles anzeigensmartctl 5.41 2011-03-16 r3296 [i686-pc-linux-gnu-2.6.38-grml] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: IBM Deskstar 40GV & 75GXP series (A5AA/A6AA firmware) Device Model: IBM-DTLA-307030 Serial Number: YKEYKML7553 Firmware Version: TX4OA6AA User Capacity: 30.738.677.760 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 5 ATA Standard is: ATA/ATAPI-5 T13 1321D revision 1 Local Time is: Mon Feb 22 06:55:51 2016 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 1762) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 19) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 099 099 060 Pre-fail Always - 2 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Spin_Up_Time 0x0007 100 100 024 Pre-fail Always - 0 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 2 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 5 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline - 0 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 3 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2 192 Power-Off_Retract_Count 0x0032 100 100 050 Old_age Always - 2 193 Load_Cycle_Count 0x0012 100 100 050 Old_age Always - 2 194 Temperature_Celsius 0x0002 157 157 000 Old_age Always - 35 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 5 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Device does not support Selective Self Tests/LoggingIBM DTLA-307045
Spoiler anzeigen
Code
Alles anzeigensmartctl 5.41 2011-03-16 r3296 [i686-pc-linux-gnu-2.6.38-grml] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: IBM Deskstar 40GV & 75GXP series (A5AA/A6AA firmware) Device Model: IBM-DTLA-307045 Serial Number: YMCYMMZ9226 Firmware Version: TX6OA6AA User Capacity: 46.115.758.080 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 5 ATA Standard is: ATA/ATAPI-5 T13 1321D revision 1 Local Time is: Mon Feb 22 03:26:56 2016 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 2294) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 28) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 060 Pre-fail Always - 65536 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Spin_Up_Time 0x0007 100 100 024 Pre-fail Always - 0 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 2 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 9 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline - 0 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 7 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2 192 Power-Off_Retract_Count 0x0032 100 100 050 Old_age Always - 2 193 Load_Cycle_Count 0x0012 100 100 050 Old_age Always - 2 194 Temperature_Celsius 0x0002 152 152 000 Old_age Always - 36 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 11 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Device does not support Selective Self Tests/LoggingIBM DTLA-307075
Spoiler anzeigen
Code
Alles anzeigensmartctl 5.41 2011-03-16 r3296 [i686-pc-linux-gnu-2.6.38-grml] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: IBM Deskstar 40GV & 75GXP series (A5AA/A6AA firmware) Device Model: IBM-DTLA-307075 Serial Number: YSDYSG63983 Firmware Version: TXAOA5AA User Capacity: 76.869.918.720 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 5 ATA Standard is: ATA/ATAPI-5 T13 1321D revision 1 Local Time is: Sun Feb 21 20:15:18 2016 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 3356) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 45) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 060 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Spin_Up_Time 0x0007 100 100 024 Pre-fail Always - 0 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 2 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 7 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline - 0 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 6 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2 192 Power-Off_Retract_Count 0x0032 100 100 050 Old_age Always - 2 193 Load_Cycle_Count 0x0012 100 100 050 Old_age Always - 2 194 Temperature_Celsius 0x0002 122 122 000 Old_age Always - 45 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 16 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Device does not support Selective Self Tests/Logging -
Aber alle für die Serie typisch mit defekten Sektoren.
-
-
-
So etwas nicht in englischer Sprache finde ich gruselig, da für mich unnötig unübersichtlich.
-
So etwas nicht in englischer Sprache finde ich gruselig, da für mich unnötig unübersichtlich.Alles immer noch besser als der Treiber für das Intel®-SATA-ÜBERFALL-Steuerpult.
-
Dell Latitude D620:
Hitachi HTS723232A7A364 (320 GB, 7200 RPM, SATA-II)
Hauptrechner:
Samsung 830 64 GB
TOSHIBA DT01ACA100 (1 TB, 7200 RPM, SATA-III) -
Alles immer noch besser als der Treiber für das Intel®-SATA-ÜBERFALL-Steuerpult.
Geil! Ich will auch Überfall
-
Der Überfall ist aber nicht aktiviert! Nur ein olles RAID...
Jetzt mitmachen!
Du hast noch kein Benutzerkonto auf unserer Seite? Registriere dich kostenlos und nimm an unserer Community teil!