Lubuntu, nVidia und xconfig

[freaked]

dafuq?
es is ne 7900gs, der tft kann 1280x1024.

per synaptics und manueller installation und neuem kernelgedöhns keine änderung.
ich erwarte hilfe!

[pETe!]

(28.11.2012 23:39)freaked schrieb:  ich erwarte hilfe!

Achja? Frag doch mal beim Kiosk um die Ecke, die haben schon ma Schnaps.

Sonst versuch ma auf Detect Displays zu klicken.

[gandro]

http://wiki.ubuntuusers.de/Bildschirmauf...inzufuegen

gidf

[freaked]

das sollte ja
nvidia-xconfig --mode=1280x1024
für mich tun oder?
da war nach nem x neustart die auflösung auch nicht drin.

[Dany]

Ändere mal in der xorg.conf

Code:

SubSection "Display"
                Depth           24
                Modes          "640x480" "320x240"
        EndSubSection

zu

Code:

SubSection "Display"
                Depth           24
                Modes           "1280x1024" "1024x768" "800x600" "640x480"
        EndSubSection

oder so ähnlich.

[mrshadowtux]

Nehm doch einfach den freien Treiber statt dem proprietaeren Muell

Dann stellt sich die Aufloesung dank xrandr auch automatisch richtig an

[freaked]

bitte mir das zu konfigurieren gandro - es klappt nicht

Spoiler anzeigen

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 304.64 (buildmeister@swio-display-x86-rhel47-12) Tue Oct 30 12:04:46 PDT 2012

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 304.51 (buildd@batsu) Fri Oct 12 12:53:54 UTC 2012

Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "InputDevice"

# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "CRT-1"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7600 GS"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "Stereo" "0"
Option "nvidiaXineramaInfoOrder" "CRT-1"
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection

[friedrichheinze]

cat /var/log/Xorg.0.log

[freaked]

Spoiler anzeigen

root@DUALCORE:~# cat /var/log/Xorg.0.log
[ 13.583]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 13.584] X Protocol Version 11, Revision 0
[ 13.584] Build Operating System: Linux 3.2.0-30-generic x86_64 Ubuntu
[ 13.584] Current Operating System: Linux DUALCORE 3.5.0-17-generic #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 x86_64
[ 13.584] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-17-generic root=UUID=dcc1e527-e36a-4fc8-93ec-feb7713021e1 ro quiet splash
[ 13.584] Build Date: 08 October 2012 03:34:01PM
[ 13.584] xorg-server 2:1.13.0-0ubuntu6 (For technical support please see http://www.ubuntu.com/support)
[ 13.584] Current version of pixman: 0.26.0
[ 13.584] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 13.584] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 13.584] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 29 11:00:18 2012
[ 13.584] (==) Using config file: "/etc/X11/xorg.conf"
[ 13.584] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 13.584] (==) ServerLayout "Layout0"
[ 13.584] (**) |-->Screen "Screen0" (0)
[ 13.584] (**) | |-->Monitor "Monitor0"
[ 13.584] (**) | |-->Device "Device0"
[ 13.584] (**) |-->Input Device "Keyboard0"
[ 13.584] (**) |-->Input Device "Mouse0"
[ 13.585] (**) Option "Xinerama" "0"
[ 13.585] (==) Automatically adding devices
[ 13.585] (==) Automatically enabling devices
[ 13.585] (==) Automatically adding GPU devices
[ 13.585] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 13.585] Entry deleted from font path.
[ 13.585] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 13.585] Entry deleted from font path.
[ 13.585] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 13.585] Entry deleted from font path.
[ 13.585] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[ 13.585] Entry deleted from font path.
[ 13.585] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 13.585] Entry deleted from font path.
[ 13.585] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 13.585] Entry deleted from font path.
[ 13.585] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 13.585] Entry deleted from font path.
[ 13.585] (==) FontPath set to:
/usr/share/fonts/X11/misc,
built-ins
[ 13.585] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 13.585] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 13.585] (WW) Disabling Keyboard0
[ 13.585] (WW) Disabling Mouse0
[ 13.585] (II) Loader magic: 0x7f0fa822ac40
[ 13.585] (II) Module ABI versions:
[ 13.585] X.Org ANSI C Emulation: 0.4
[ 13.585] X.Org Video Driver: 13.0
[ 13.585] X.Org XInput driver : 18.0
[ 13.585] X.Org Server Extension : 7.0
[ 13.586] (--) PCI:*(0:2:0:0) 10de:0392:0000:0000 rev 161, Mem @ 0xdc000000/16777216, 0xc0000000/268435456, 0xdd000000/16777216, I/O @ 0x0000bc00/128, BIOS @ 0x????????/131072
[ 13.590] (II) Open ACPI successful (/var/run/acpid.socket)
[ 13.590] Initializing built-in extension Generic Event Extension
[ 13.590] Initializing built-in extension SHAPE
[ 13.590] Initializing built-in extension MIT-SHM
[ 13.590] Initializing built-in extension XInputExtension
[ 13.590] Initializing built-in extension XTEST
[ 13.590] Initializing built-in extension BIG-REQUESTS
[ 13.590] Initializing built-in extension SYNC
[ 13.590] Initializing built-in extension XKEYBOARD
[ 13.590] Initializing built-in extension XC-MISC
[ 13.590] Initializing built-in extension SECURITY
[ 13.590] Initializing built-in extension XINERAMA
[ 13.590] Initializing built-in extension XFIXES
[ 13.590] Initializing built-in extension RENDER
[ 13.590] Initializing built-in extension RANDR
[ 13.590] Initializing built-in extension COMPOSITE
[ 13.590] Initializing built-in extension DAMAGE
[ 13.590] Initializing built-in extension MIT-SCREEN-SAVER
[ 13.590] Initializing built-in extension DOUBLE-BUFFER
[ 13.590] Initializing built-in extension RECORD
[ 13.590] Initializing built-in extension DPMS
[ 13.590] Initializing built-in extension X-Resource
[ 13.590] Initializing built-in extension XVideo
[ 13.590] Initializing built-in extension XVideo-MotionCompensation
[ 13.590] Initializing built-in extension XFree86-VidModeExtension
[ 13.590] Initializing built-in extension XFree86-DGA
[ 13.590] Initializing built-in extension XFree86-DRI
[ 13.590] Initializing built-in extension DRI2
[ 13.590] (II) LoadModule: "glx"
[ 13.617] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 13.636] (II) Module glx: vendor="NVIDIA Corporation"
[ 13.636] compiled for 4.0.2, module version = 1.0.0
[ 13.636] Module class: X.Org Server Extension
[ 13.636] (II) NVIDIA GLX Module 304.64 Tue Oct 30 11:18:32 PDT 2012
[ 13.636] Loading extension GLX
[ 13.636] (II) LoadModule: "nvidia"
[ 13.649] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 13.650] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 13.650] compiled for 4.0.2, module version = 1.0.0
[ 13.650] Module class: X.Org Video Driver
[ 13.651] (II) NVIDIA dlloader X Driver 304.64 Tue Oct 30 10:59:51 PDT 2012
[ 13.651] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 13.651] (++) using VT number 7

[ 13.652] (II) Loading sub module "fb"
[ 13.652] (II) LoadModule: "fb"
[ 13.652] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 13.653] (II) Module fb: vendor="X.Org Foundation"
[ 13.653] compiled for 1.13.0, module version = 1.0.0
[ 13.653] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.653] (II) Loading sub module "wfb"
[ 13.653] (II) LoadModule: "wfb"
[ 13.653] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 13.653] (II) Module wfb: vendor="X.Org Foundation"
[ 13.653] compiled for 1.13.0, module version = 1.0.0
[ 13.653] ABI class: X.Org ANSI C Emulation, version 0.4
[ 13.653] (II) Loading sub module "ramdac"
[ 13.653] (II) LoadModule: "ramdac"
[ 13.653] (II) Module "ramdac" already built-in
[ 13.653] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 13.653] (==) NVIDIA(0): RGB weight 888
[ 13.653] (==) NVIDIA(0): Default visual is TrueColor
[ 13.653] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 13.653] (**) NVIDIA(0): Option "Stereo" "0"
[ 13.653] (**) NVIDIA(0): Stereo disabled by request
[ 13.653] (**) NVIDIA(0): Enabling 2D acceleration
[ 14.415] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[ 14.417] (II) NVIDIA(0): NVIDIA GPU GeForce 7600 GS (G73) at PCI:2:0:0 (GPU-0)
[ 14.417] (--) NVIDIA(0): Memory: 262144 kBytes
[ 14.417] (--) NVIDIA(0): VideoBIOS: 05.73.22.40.00
[ 14.417] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 14.417] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 14.417] (--) NVIDIA(0): Valid display device(s) on GeForce 7600 GS at PCI:2:0:0
[ 14.417] (--) NVIDIA(0): CRT-0
[ 14.417] (--) NVIDIA(0): CRT-1 (connected)
[ 14.417] (--) NVIDIA(0): TV-0
[ 14.417] (--) NVIDIA(0): DFP-0
[ 14.417] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 14.417] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[ 14.417] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
[ 14.417] (--) NVIDIA(0): TV encoder: (null)
[ 14.417] (--) NVIDIA(0): DFP-0: 330.0 MHz maximum pixel clock
[ 14.417] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 14.417] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 14.417] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
[ 14.417] (**) NVIDIA(0): all display devices.)
[ 14.418] (WW) NVIDIA(0): No valid modes for "CRT-1:1280x1024"; removing.
[ 14.418] (WW) NVIDIA(0): No valid modes for "CRT-1:1024x768"; removing.
[ 14.418] (WW) NVIDIA(0): No valid modes for "CRT-1:800x600"; removing.
[ 14.418] (II) NVIDIA(0): Validated MetaModes:
[ 14.418] (II) NVIDIA(0): "CRT-1:640x480"
[ 14.418] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 14.418] (WW) NVIDIA(0): Unable to support custom viewPortOut 640 x 360 +0 +60
[ 14.418] (WW) NVIDIA(0): Unable to get display device CRT-1's EDID; cannot compute DPI
[ 14.418] (WW) NVIDIA(0): from CRT-1's EDID.
[ 14.418] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 14.418] (--) Depth 24 pixmap format is 32 bpp
[ 14.437] (II) NVIDIA(0): Setting mode "CRT-1:640x480"
[ 14.506] (II) NVIDIA(0): Built-in logo is bigger than the screen.
[ 14.507] Loading extension NV-GLX
[ 14.543] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 14.543] (==) NVIDIA(0): Backing store disabled
[ 14.543] (==) NVIDIA(0): Silken mouse enabled
[ 14.544] (**) NVIDIA(0): DPMS enabled
[ 14.544] Loading extension NV-CONTROL
[ 14.544] Loading extension XINERAMA
[ 14.544] (II) Loading sub module "dri2"
[ 14.544] (II) LoadModule: "dri2"
[ 14.544] (II) Module "dri2" already built-in
[ 14.544] (II) NVIDIA(0): [DRI2] Setup complete
[ 14.544] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 14.544] (--) RandR disabled
[ 14.550] (II) Initializing extension GLX
[ 14.565] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 14.569] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 14.569] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 14.569] (II) LoadModule: "evdev"
[ 14.569] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 14.569] (II) Module evdev: vendor="X.Org Foundation"
[ 14.569] compiled for 1.13.0, module version = 2.7.3
[ 14.569] Module class: X.Org XInput Driver
[ 14.569] ABI class: X.Org XInput driver, version 18.0
[ 14.569] (II) Using input driver 'evdev' for 'Power Button'
[ 14.569] (**) Power Button: always reports core events
[ 14.569] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 14.569] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 14.569] (--) evdev: Power Button: Found keys
[ 14.569] (II) evdev: Power Button: Configuring as keyboard
[ 14.569] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 14.570] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 14.570] (**) Option "xkb_rules" "evdev"
[ 14.570] (**) Option "xkb_model" "pc105"
[ 14.570] (**) Option "xkb_layout" "de"
[ 14.572] (II) XKB: reuse xkmfile /var/lib/xkb/server-808BBA3D4C227BDB44C370226C34E44C5D69A4A9.xkm
[ 14.572] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 14.573] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 14.573] (II) Using input driver 'evdev' for 'Power Button'
[ 14.573] (**) Power Button: always reports core events
[ 14.573] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 14.573] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 14.573] (--) evdev: Power Button: Found keys
[ 14.573] (II) evdev: Power Button: Configuring as keyboard
[ 14.573] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 14.573] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 14.573] (**) Option "xkb_rules" "evdev"
[ 14.573] (**) Option "xkb_model" "pc105"
[ 14.573] (**) Option "xkb_layout" "de"
[ 14.573] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 14.573] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 14.573] (II) Using input driver 'evdev' for 'Sleep Button'
[ 14.573] (**) Sleep Button: always reports core events
[ 14.573] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[ 14.573] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 14.573] (--) evdev: Sleep Button: Found keys
[ 14.573] (II) evdev: Sleep Button: Configuring as keyboard
[ 14.573] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1/event1"
[ 14.574] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 14.574] (**) Option "xkb_rules" "evdev"
[ 14.574] (**) Option "xkb_model" "pc105"
[ 14.574] (**) Option "xkb_layout" "de"
[ 14.574] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[ 14.574] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 14.574] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 14.574] (**) AT Translated Set 2 keyboard: always reports core events
[ 14.574] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[ 14.574] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 14.574] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 14.574] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 14.574] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[ 14.574] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 14.574] (**) Option "xkb_rules" "evdev"
[ 14.574] (**) Option "xkb_model" "pc105"
[ 14.574] (**) Option "xkb_layout" "de"
[ 14.575] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event4)
[ 14.575] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall"
[ 14.575] (II) Using input driver 'evdev' for 'ImExPS/2 Generic Explorer Mouse'
[ 14.575] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
[ 14.575] (**) evdev: ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event4"
[ 14.575] (--) evdev: ImExPS/2 Generic Explorer Mouse: Vendor 0x2 Product 0x6
[ 14.575] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons
[ 14.575] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)
[ 14.575] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found relative axes
[ 14.575] (--) evdev: ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
[ 14.575] (II) evdev: ImExPS/2 Generic Explorer Mouse: Configuring as mouse
[ 14.575] (II) evdev: ImExPS/2 Generic Explorer Mouse: Adding scrollwheel support
[ 14.575] (**) evdev: ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
[ 14.575] (**) evdev: ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 14.575] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event4"
[ 14.575] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE, id 10)
[ 14.575] (II) evdev: ImExPS/2 Generic Explorer Mouse: initialized for relative axes.
[ 14.576] (**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1
[ 14.576] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration profile 0
[ 14.576] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000
[ 14.576] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4
[ 14.576] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse0)
[ 14.576] (II) No input driver specified, ignoring this device.
[ 14.576] (II) This device may have been added with another device file.
[ 15.531] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[ 15.531] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 15.531] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
[ 15.531] (**) NVIDIA(0): all display devices.)
[ 15.556] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[ 15.556] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 15.556] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
[ 15.556] (**) NVIDIA(0): all display devices.)
[ 52.544] (WW) NVIDIA(0): Specified panning domain height of 360 is smaller than
[ 52.544] (WW) NVIDIA(0): viewport height 480; adjusting
[ 68.090] (II) NVIDIA(0): Setting mode "VGA-0:nvidia-auto-select"
[ 68.169] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[ 68.170] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 68.170] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
[ 68.170] (**) NVIDIA(0): all display devices.)
[ 68.191] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[ 68.191] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 68.191] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
[ 68.191] (**) NVIDIA(0): all display devices.)
[ 70.172] (WW) NVIDIA(0): Specified panning domain height of 360 is smaller than
[ 70.172] (WW) NVIDIA(0): viewport height 480; adjusting
[ 76.445] (WW) NVIDIA(0): Specified panning domain height of 360 is smaller than
[ 76.445] (WW) NVIDIA(0): viewport height 480; adjusting
[ 1813.130] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[ 1813.130] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 1813.130] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
[ 1813.131] (**) NVIDIA(0): all display devices.)
[ 1817.908] (WW) NVIDIA(GPU-0): Unable to read EDID for display device CRT-1
[ 1817.908] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 1817.908] (**) NVIDIA(0): device CRT-1 (Using EDID frequencies has been enabled on
[ 1817.908] (**) NVIDIA(0): all display devices.)

---

http://www.linuxforums.org/forum/debian-...nitor.html

habs jetzt hinbekommen
danke und cia

[Antz]

Jaja, X und CRTs, vor allem Ältere, immer das selbe Spiel.
Kenn das von nem IBM P200, waren immer so Kunstgriffe nötig.