Device Model: FUJITSU MPD3064AT
[…]
9 Power_On_Seconds 0x0012 001 001 020 Old_age Always FAILING_NOW 27346h+43m+11s
[…]
Was ist an einer Betriebsdauer von 98448191 s so besonders?
komplette Ausgabe von smartctl -a:
Code
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.16.5-64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Fujitsu MPA..MPG
Device Model: FUJITSU MPD3064AT
Serial Number: 05073524
Firmware Version: DD-03-44
User Capacity: 6,488,294,400 bytes [6.48 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-4 (minor revision not indicated)
Local Time is: Wed Feb 5 21:47:51 2020 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 2160) seconds.
Offline data collection
capabilities: (0x03) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
No Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
No General Purpose Logging support.
SMART Attributes Data Structure revision number: 5
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 032 Pre-fail Always - 65262
2 Throughput_Performance 0x0005 100 100 020 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 093 086 025 Pre-fail Always - 2
4 Start_Stop_Count 0x0012 094 094 016 Old_age Always - 3460
5 Reallocated_Sector_Ct 0x0033 100 100 024 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 020 Pre-fail Always - 3787
8 Seek_Time_Performance 0x0005 100 100 019 Pre-fail Offline - 0
9 Power_On_Seconds 0x0012 001 001 020 Old_age Always FAILING_NOW 27346h+43m+11s
10 Spin_Retry_Count 0x0013 100 100 020 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 085 085 020 Old_age Always - 2309
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000b 100 100 020 Pre-fail Always - 1987
SMART Error Log not supported
SMART Self-test Log not supported
Selective Self-tests/Logging not supported