Absolut toll, aber ich verkneife mir diese Geräte wo ich nur kann
sind zu einem "Quasitower" aufgestapelt... hatte ich glücklicherweise vor der beginnenden Retrowelle bei ebay günstig ersteigert. Heute müßte ich sehr viel mehr Geld dafür hinlegen... was ich mir dann auch verkneifen würde.
PCs:
Medion mit 3GHz P4, 1,75GB Ram, 80GB Platte, Noch als HTPC
Pentium Quad Core mit 4GB Ram und ner 1,8GB Grafikkarte, sowie 320GB SATA Grafikkarte (in Arbeit)
Pentium Dual Core, 320GB SATA Platte, 256MB Nvidia Grafikkarte, noch im Aufbau
Notebooks:
FSC Amilo PI 2540 mit 1,5GB Ram, 250GB Platte, 1,6GHz Dual Core
Asus F5Z 2GB Ram, 320GB Platte, AMD Turion Prozessor
Classic Rechner:
Amiga 500, kpl Original und mit intaktem Siegel, leider Laufwerk defekt (erzeugt nur Lesefehler)
Amiga 2000, einiges aufgerüstet, hab aber zur Zeit da nix im Kopf, auf jeden Fall mit SCSI Platte, ner Turbo Karte und CD Rom Laufwerk. Leider momentan nicht funktionsfähig. Netzteil teilzerlegt
C128D Plastikgehäuse
Monitor 1084S; Monitor 1085S. Beide optisch nicht die schönsten, technisch aber ok
zusätzliches Commodore Amiga Laufwerk, einiges an Zubehör
Ja und einige Konsolen, das ist hier ja aber ned gefragt. Absolute Baustellen, Teile und Bastelnotebooks hab ich aussen vorgelassen
Um mal ein paar Modelle hier reinzuschreiben die ich habe (sind in Summe mittlerweile 194 Systeme - zuzüglich der Selbstbau-Systeme, die ich noch habe!):
Die Rechner sind weitestgehend so, wie ich sie bekommen habe. Das Model 76i ist eher ausgestattet wie ein Model 76s - aber ist auch nicht so schwer, einen SCSI-Controller für MicroChannel zu kriegen.
Ansonsten hab ich an IBM-kompatiblen noch:
Der Rest ist eigentlich bekannt, sind dann einige Unix-Kisten, diverse Heimcomputer, alte Macs sowie viele Robotron-Kisten. Naja, und diverse Siemens-PGs hab ich auch noch (630, 675, 685, 730C, 2x 740, 750).
IBM PS/2 Type 9556-0BA
IBM PS/2 Type 8556-059
IBM PS/2 Type 8535-043
Haste ein paar Specs zu den Kisten? Die reinen Typ-Nummern sind ja leider nicht so aussagekräftig - und 'ne Übersicht über die jeweilige Original-Ausstattung hab ich leider noch nicht gefunden.. Ist auf jeden Fall ein Model 35 und zwei Model 56.
IBM PC Type 5150
IBM XT Type 5160
IBM AT Type 5170
IBM XT/286 Type 5162
Fehlt ja bei der klassischen Serie nur noch ein 5140 PC Convertible und ein 5155 Portable Personal Computer 
Okay, ein 4860 PCjr oder ein PCjx vllt. auch noch, aber die sind ja wirklich schwer zu bekommen (wobei das auch auf den 5140 zutreffen dürfte).
TOT den Virtual-Maschinen/Emulatoren... es leben die Originale!!
Es geht doch nix über echt harte Ware 
Nen IBM PC 5150 hab ich auch hier, sogar mit Festplattencontroller und 40MB MFM-Festplatte 
Achjo, CGA-Grafik und CGA-Monitor.
... Was dann kein 5150 mehr wirklich ist 
... Was dann kein 5150 mehr wirklich ist
joo, da gehören maximal zwei Diskettenlaufwerke rein
Diese Seite kennst du
Diese Seite kennst du
Jetzt kenne ich sie. Danke für den Link!
Wenn ichs mir so angugge: Meine Type 5162-286, 5170-339, 8555-061 und 8570-A21 scheinen noch original von der Grund-Ausrüstung her zu sein.
Die Type 8530-021 hat allerdings 'n 1440k-Laufwerk drin, kein 720k.
Die Type 9556-0BA hat auch nicht mehr die 200MB-Platte drin - die ist verstorben, ist nun eine 360MB drin (auch Quantum wie vorher).
Und die Type 9576-SLB gibts in der Liste nicht. Und die Type 9577-0UA hat keine Platte atm, hab ich ohne bekommen.
sind in Summe mittlerweile 194 Systeme - zuzüglich der Selbstbau-Systeme, die ich noch habe!
Und ich dachte immer, meine 35 Blechkisten + 1 Schleppi (vom Am286-10 bis zum Phenom II X6 1100T; also nix ganz Altes & ganz Neues) wären schon schlimm. 
Naja, ich hab ja schon alleine 30 DDR-Rechner hier - und 16 PowerBooks (davon 12 68k-basiert) sowie 36 ThinkPads ;D Alleine 66 von den 194 Systemen sind Portables, Laptops bzw. Notebooks
was macht man mit soviel REchnern? die kannst du doch nie effektiv nutzen.
Gegenfrage: Was macht ein Briefmarkensammler mit seinen Briefmarken? Oder ein Münzsammler mit seinen Münzen?
Wenns mir ums effektive ausnutzen ginge, wäre sogar mein Hauptrechner zu viel - das bissl, was ich mache, langweilt den nur
ein Sammler, wie auch ich einer bin, nutzt die Rechner ja irgendwie effektiv. Er verhindert die Verschrottung von "Kulturgut" 
aus der Zeit der Homecomputer- und und Bürocomputerära und hält sie, wenn möglich, funktionsfähig.
Genauso sieht es aus
Seit heute sind noch 3 weitere IBMs in meinem Bestand:
Das Model 80 hat kurioserweise einen 20MHz-386 drauf - der aber nur mit 16MHz getaktet wird (die ersten Model 80-Modelle eben). Dass man sowas anno 1987 mit dem doch recht teuren 20MHz 386er gemacht hat... Vermutlich waren die 20MHz-386er einfach zu viel da und die Type 8580-311 sowie 8580-111 wurden zu wenig gekauft (waren ja auch teuer..)
Und die obige Liste kann ich näher konkretisieren:
IBM 5155 Portable Personal Computer (Type 5155-076)
IBM 5162 Personal Computer/XT Model 286 (Type 5162-286)
IBM 5170 Personal Computer/AT (Type 5170-339)
Ich habe es mal aktualisiert:
Meine Rechner sind u.a.:
Aktuell...
Xeon 1230v3, 8GB Ram, R9 270 x- meiner
Core2Duo E8500, 8GB Ram, HD4350 - Väterchen
Zbox ID18, 4GB Ram, Celeron U1007 - Wohnzimmerbox
Asus F75 17", Pentium DualCore, 6GB Ram - Väterchen Notebook
Thinkpad T61 15,4", Core2Duo 1,8GHz, 2GB Ram - Mamas Thinkpad
Samsung Slate 7 11.6", Celeron 847, 2GB Ram, 64GB - mein Tab
Lenovo 3000 N200 15.4", Pentium DualCore 1,8GHz, 2GB DDR2 Ram, GeForce 7300 Go - Väterchens altes Notebook
Dual P3 1,13 GHz Tualatin, 1GB SD Ram, ATI 9600XT 128MB - Mein Dual P3
Highscreen Sky Mini als wiederaufbau, atm PMMX 233, 64MB Ram, S3 Trio 2MB + Voodoo 1 4MB - mein alter
Asus A92G 15.4", Pentium M 725 1,6GHz , 1GB DDR Ram - altes Notebook
geht zwar noch, aber leicht schrottig
Acer Travelmate 4020 15.4", Pentium M 725 1,6GHz , 1.5GB DDR2 Ram
Alle Thinkpads die Zuhause unterwegs sind, ausgenommen mein defektes X30 (Teilespender von mrshadowtux) und die verliehenen zwei 760er und das 570E bei meinem Vater. Demnächst kommt Zuwachs mit mindestens einem 600er.
Mal ein paar harte Fakten zum aufgemotzten T500:
cpuinfo
lubuntu@lubuntu:~$ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz
stepping : 10
microcode : 0xa0c
cpu MHz : 2534.000
cache size : 6144 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fdiv_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm ida dtherm tpr_shadow vnmi flexpriority
bogomips : 5053.75
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 23
model name : Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz
stepping : 10
microcode : 0xa0c
cpu MHz : 2534.000
cache size : 6144 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
apicid : 1
initial apicid : 1
fdiv_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 13
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 xsave lahf_lm ida dtherm tpr_shadow vnmi flexpriority
bogomips : 5053.75
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
lubuntu@lubuntu:~$
meminfo
lubuntu@lubuntu:~$ cat /proc/meminfo
MemTotal: 8213352 kB
MemFree: 4812444 kB
Buffers: 193384 kB
Cached: 2737152 kB
SwapCached: 0 kB
Active: 1448948 kB
Inactive: 1763704 kB
Active(anon): 347960 kB
Inactive(anon): 74080 kB
Active(file): 1100988 kB
Inactive(file): 1689624 kB
Unevictable: 0 kB
Mlocked: 0 kB
HighTotal: 7403952 kB
HighFree: 4507132 kB
LowTotal: 809400 kB
LowFree: 305312 kB
SwapTotal: 4106672 kB
SwapFree: 4106672 kB
Dirty: 10532 kB
Writeback: 17088 kB
AnonPages: 282224 kB
Mapped: 82160 kB
Shmem: 139816 kB
Slab: 124692 kB
SReclaimable: 109076 kB
SUnreclaim: 15616 kB
KernelStack: 2664 kB
PageTables: 4164 kB
NFS_Unstable: 0 kB
Bounce: 17232 kB
WritebackTmp: 0 kB
CommitLimit: 8213348 kB
Committed_AS: 1513280 kB
VmallocTotal: 122880 kB
VmallocUsed: 41836 kB
VmallocChunk: 77624 kB
HardwareCorrupted: 0 kB
AnonHugePages: 114688 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 2048 kB
DirectMap4k: 34808 kB
DirectMap2M: 878592 kB
lubuntu@lubuntu:~$
lspci
lubuntu@lubuntu:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07)
00:03.3 Serial controller: Intel Corporation Mobile 4 Series Chipset AMT SOL Redirection (rev 07)
00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV635/M86 [Mobility Radeon HD 3650]
04:00.0 Network controller: Intel Corporation Centrino Ultimate-N 6300 (rev 3e)
15:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
15:00.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04)
15:00.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21)
15:00.4 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 11)
15:00.5 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 11)
lubuntu@lubuntu:~$
lsusb
lubuntu@lubuntu:~$ lsusb
Bus 002 Device 002: ID 07ca:a310 AVerMedia Technologies, Inc.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 006: ID 046d:c318 Logitech, Inc. Illuminated Keyboard
Bus 001 Device 005: ID 041e:4083 Creative Technology, Ltd Live! Cam Socialize [VF0640]
Bus 001 Device 004: ID 046d:c068 Logitech, Inc. G500 Laser Mouse
Bus 001 Device 003: ID 045e:0291 Microsoft Corp. Xbox 360 Wireless Receiver for Windows
Bus 001 Device 002: ID 04b3:4485 IBM Corp. Serial Converter
Bus 001 Device 007: ID 0781:556b SanDisk Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
lubuntu@lubuntu:~$
halbe dmesg.. (terminal zu klein.. :D)
[ 0.201888] pci 0000:01:00.0: supports D1 D2
[ 0.201945] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.201948] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.201951] pci 0000:00:01.0: bridge window [mem 0xcff00000-0xcfffffff]
[ 0.201956] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.202027] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.202179] pci 0000:04:00.0: [8086:422b] type 00 class 0x028000
[ 0.202226] pci 0000:04:00.0: reg 0x10: [mem 0xf4200000-0xf4201fff 64bit]
[ 0.202469] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.208046] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.208054] pci 0000:00:1c.2: bridge window [mem 0xf4200000-0xf42fffff]
[ 0.208138] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.208143] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.208148] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.208156] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf40fffff 64bit pref]
[ 0.208231] pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
[ 0.208236] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff]
[ 0.208241] pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfbffffff]
[ 0.208248] pci 0000:00:1c.4: bridge window [mem 0xf4100000-0xf41fffff 64bit pref]
[ 0.208321] pci 0000:15:00.0: [1180:0476] type 02 class 0x060700
[ 0.208341] pci 0000:15:00.0: proprietary Ricoh MMC controller disabled (via cardbus function)
[ 0.208342] pci 0000:15:00.0: MMC cards are now supported by standard SDHCI controller
[ 0.208358] pci 0000:15:00.0: reg 0x10: [mem 0xf4300000-0xf4300fff]
[ 0.208394] pci 0000:15:00.0: supports D1 D2
[ 0.208396] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.208457] pci 0000:15:00.1: [1180:0832] type 00 class 0x0c0010
[ 0.208479] pci 0000:15:00.1: reg 0x10: [mem 0xf4301000-0xf43017ff]
[ 0.208578] pci 0000:15:00.1: supports D1 D2
[ 0.208580] pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.208634] pci 0000:15:00.2: [1180:0822] type 00 class 0x080500
[ 0.208655] pci 0000:15:00.2: reg 0x10: [mem 0xf4301800-0xf43018ff]
[ 0.208751] pci 0000:15:00.2: supports D1 D2
[ 0.208753] pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.208808] pci 0000:15:00.4: [1180:0592] type 00 class 0x088000
[ 0.208830] pci 0000:15:00.4: reg 0x10: [mem 0xf4302000-0xf43020ff]
[ 0.208926] pci 0000:15:00.4: supports D1 D2
[ 0.208928] pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.208980] pci 0000:15:00.5: [1180:0852] type 00 class 0x088000
[ 0.209002] pci 0000:15:00.5: reg 0x10: [mem 0xf4302400-0xf43024ff]
[ 0.209099] pci 0000:15:00.5: supports D1 D2
[ 0.209101] pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.209201] pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode)
[ 0.209206] pci 0000:00:1e.0: bridge window [io 0x5000-0x8fff]
[ 0.209211] pci 0000:00:1e.0: bridge window [mem 0xf4300000-0xf7ffffff]
[ 0.209218] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf3ffffff 64bit pref]
[ 0.209221] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.209223] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.209225] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.209228] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.209230] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.209232] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[ 0.209283] pci_bus 0000:16: busn_res: can not insert [bus 16-ff] under [bus 15-18] (conflicts with (null) [bus 15-18])
[ 0.209288] pci_bus 0000:16: busn_res: [bus 16-ff] end is updated to 17
[ 0.209351] pci_bus 0000:00: on NUMA node 0
[ 0.209353] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.212761] ACPI: Enabled 3 GPEs in block 00 to 3F
[ 0.212773] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.212826] Found 1 acpi root devices
[ 0.212897] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.212986] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.212986] vgaarb: loaded
[ 0.212986] vgaarb: bridge control possible 0000:01:00.0
[ 0.212986] SCSI subsystem initialized
[ 0.212986] libata version 3.00 loaded.
[ 0.212986] ACPI: bus type USB registered
[ 0.212986] usbcore: registered new interface driver usbfs
[ 0.212986] usbcore: registered new interface driver hub
[ 0.212986] usbcore: registered new device driver usb
[ 0.212986] PCI: Using ACPI for IRQ routing
[ 0.217444] PCI: pci_cache_line_size set to 64 bytes
[ 0.217538] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.217540] e820: reserve RAM buffer [mem 0xbf8a1000-0xbfffffff]
[ 0.217544] e820: reserve RAM buffer [mem 0xbf9b7000-0xbfffffff]
[ 0.217547] e820: reserve RAM buffer [mem 0xbfac7000-0xbfffffff]
[ 0.217550] e820: reserve RAM buffer [mem 0xbfe00000-0xbfffffff]
[ 0.217641] NetLabel: Initializing
[ 0.217643] NetLabel: domain hash size = 128
[ 0.217644] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.217656] NetLabel: unlabeled traffic allowed by default
[ 0.217670] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.217670] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.217670] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.218146] Switched to clocksource hpet
[ 0.223048] AppArmor: AppArmor Filesystem Enabled
[ 0.223068] pnp: PnP ACPI init
[ 0.223078] ACPI: bus type PNP registered
[ 0.243380] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.243384] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.243386] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.243389] system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
[ 0.243391] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
[ 0.243394] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
[ 0.243396] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[ 0.243399] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.243401] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.243404] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.243406] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.243409] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.243412] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
[ 0.243414] system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
[ 0.243418] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.263380] system 00:01: [io 0x1000-0x107f] could not be reserved
[ 0.263383] system 00:01: [io 0x1180-0x11ff] has been reserved
[ 0.263386] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.263388] system 00:01: [io 0x15e0-0x15ef] has been reserved
[ 0.263391] system 00:01: [io 0x1600-0x167f] has been reserved
[ 0.263393] system 00:01: [io 0x1680-0x169f] has been reserved
[ 0.263396] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.263399] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.263403] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.263406] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.263409] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.263412] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.263414] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.263417] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.263474] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.263485] pnp 00:03: [dma 4]
[ 0.263506] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.263535] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.263570] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.263602] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.263636] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.263668] pnp 00:08: Plug and Play ACPI device, IDs IBM0057 PNP0f13 (active)
[ 0.263754] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (disabled)
[ 0.263837] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (disabled)
[ 0.284232] pnp: PnP ACPI: found 11 devices
[ 0.284234] ACPI: bus type PNP unregistered
[ 0.284237] PnPBIOS: Disabled by ACPI PNP
[ 0.321014] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.321019] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.321022] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[ 0.321033] pci 0000:00:1c.2: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 0.321036] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000
[ 0.321073] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.321076] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.321078] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.321081] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.321083] pci 0000:00:1c.2: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.321088] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
[ 0.321092] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.321095] pci 0000:00:1c.2: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.321099] pci 0000:00:1c.0: BAR 13: assigned [io 0x9000-0x9fff]
[ 0.321102] pci 0000:00:1c.2: BAR 13: assigned [io 0xa000-0xafff]
[ 0.321106] pci 0000:01:00.0: BAR 6: assigned [mem 0xcff00000-0xcff1ffff pref]
[ 0.321109] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.321112] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
[ 0.321115] pci 0000:00:01.0: bridge window [mem 0xcff00000-0xcfffffff]
[ 0.321119] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.321123] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.321126] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff]
[ 0.321133] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]
[ 0.321138] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.321145] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.321149] pci 0000:00:1c.2: bridge window [io 0xa000-0xafff]
[ 0.321155] pci 0000:00:1c.2: bridge window [mem 0xf4200000-0xf42fffff]
[ 0.321160] pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.321167] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.321170] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.321176] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.321181] pci 0000:00:1c.3: bridge window [mem 0xf4000000-0xf40fffff 64bit pref]
[ 0.321189] pci 0000:00:1c.4: PCI bridge to [bus 0d-14]
[ 0.321192] pci 0000:00:1c.4: bridge window [io 0x4000-0x4fff]
[ 0.321198] pci 0000:00:1c.4: bridge window [mem 0xfa000000-0xfbffffff]
[ 0.321203] pci 0000:00:1c.4: bridge window [mem 0xf4100000-0xf41fffff 64bit pref]
[ 0.321212] pci 0000:15:00.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.321215] pci 0000:15:00.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.321217] pci 0000:15:00.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.321220] pci 0000:15:00.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.321222] pci 0000:15:00.0: BAR 15: assigned [mem 0xf0000000-0xf3ffffff pref]
[ 0.321227] pci 0000:15:00.0: BAR 16: assigned [mem 0xc4000000-0xc7ffffff]
[ 0.321229] pci 0000:15:00.0: BAR 13: assigned [io 0x5000-0x50ff]
[ 0.321231] pci 0000:15:00.0: BAR 14: assigned [io 0x5400-0x54ff]
[ 0.321234] pci 0000:15:00.0: CardBus bridge to [bus 16-17]
[ 0.321236] pci 0000:15:00.0: bridge window [io 0x5000-0x50ff]
[ 0.321241] pci 0000:15:00.0: bridge window [io 0x5400-0x54ff]
[ 0.321246] pci 0000:15:00.0: bridge window [mem 0xf0000000-0xf3ffffff pref]
[ 0.321251] pci 0000:15:00.0: bridge window [mem 0xc4000000-0xc7ffffff]
[ 0.321255] pci 0000:00:1e.0: PCI bridge to [bus 15-18]
[ 0.321259] pci 0000:00:1e.0: bridge window [io 0x5000-0x8fff]
[ 0.321265] pci 0000:00:1e.0: bridge window [mem 0xf4300000-0xf7ffffff]
[ 0.321269] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xf3ffffff 64bit pref]
[ 0.321277] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.321279] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.321282] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.321284] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.321286] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.321288] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff]
[ 0.321290] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.321292] pci_bus 0000:01: resource 1 [mem 0xcff00000-0xcfffffff]
[ 0.321294] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.321296] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff]
[ 0.321298] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff]
[ 0.321301] pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.321303] pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
[ 0.321305] pci_bus 0000:04: resource 1 [mem 0xf4200000-0xf42fffff]
[ 0.321307] pci_bus 0000:04: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.321309] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
[ 0.321311] pci_bus 0000:05: resource 1 [mem 0xf8000000-0xf9ffffff]
[ 0.321313] pci_bus 0000:05: resource 2 [mem 0xf4000000-0xf40fffff 64bit pref]
[ 0.321315] pci_bus 0000:0d: resource 0 [io 0x4000-0x4fff]
[ 0.321317] pci_bus 0000:0d: resource 1 [mem 0xfa000000-0xfbffffff]
[ 0.321319] pci_bus 0000:0d: resource 2 [mem 0xf4100000-0xf41fffff 64bit pref]
[ 0.321321] pci_bus 0000:15: resource 0 [io 0x5000-0x8fff]
[ 0.321323] pci_bus 0000:15: resource 1 [mem 0xf4300000-0xf7ffffff]
[ 0.321326] pci_bus 0000:15: resource 2 [mem 0xf0000000-0xf3ffffff 64bit pref]
[ 0.321328] pci_bus 0000:15: resource 4 [io 0x0000-0x0cf7]
[ 0.321330] pci_bus 0000:15: resource 5 [io 0x0d00-0xffff]
[ 0.321332] pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.321334] pci_bus 0000:15: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.321336] pci_bus 0000:15: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.321338] pci_bus 0000:15: resource 9 [mem 0xc0000000-0xfebfffff]
[ 0.321340] pci_bus 0000:16: resource 0 [io 0x5000-0x50ff]
[ 0.321342] pci_bus 0000:16: resource 1 [io 0x5400-0x54ff]
[ 0.321344] pci_bus 0000:16: resource 2 [mem 0xf0000000-0xf3ffffff pref]
[ 0.321346] pci_bus 0000:16: resource 3 [mem 0xc4000000-0xc7ffffff]
[ 0.321381] NET: Registered protocol family 2
[ 0.321531] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.321544] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.321563] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.321585] TCP: reno registered
[ 0.321588] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.321595] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.321651] NET: Registered protocol family 1
[ 0.322793] pci 0000:01:00.0: Boot video device
[ 0.322813] PCI: CLS 64 bytes, default 64
[ 0.322853] Trying to unpack rootfs image as initramfs...
[ 4.087099] Freeing initrd memory: 19528K (f68ec000 - f7bfe000)
[ 4.087264] Simple Boot Flag at 0x35 set to 0x1
[ 4.087400] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa0c
[ 4.087409] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa0c
[ 4.087482] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 4.087484] Scanning for low memory corruption every 60 seconds
[ 4.087763] Initialise system trusted keyring
[ 4.087808] audit: initializing netlink socket (disabled)
[ 4.087822] type=2000 audit(1398021881.084:1): initialized
[ 4.109342] bounce pool size: 64 pages
[ 4.109357] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 4.111290] VFS: Disk quotas dquot_6.5.2
[ 4.111339] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 4.111840] fuse init (API version 7.22)
[ 4.111928] msgmni has been set to 1579
[ 4.111998] Key type big_key registered
[ 4.112545] Key type asymmetric registered
[ 4.112547] Asymmetric key parser 'x509' registered
[ 4.112585] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 4.112620] io scheduler noop registered
[ 4.112622] io scheduler deadline registered (default)
[ 4.112651] io scheduler cfq registered
[ 4.112895] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 4.113058] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 4.113242] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 4.113432] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[ 4.113618] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
[ 4.113745] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 4.113748] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 4.113751] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 4.113776] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 4.113781] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 4.113808] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 4.113810] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 4.113815] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 4.113839] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 4.113844] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 4.113868] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 4.113873] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 4.113892] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 4.113956] pciehp 0000:00:01.0:pcie04: HPC vendor_id 8086 device_id 2a41 ss_vid 17aa ss_did 20e2
[ 4.113984] pciehp 0000:00:01.0:pcie04: service driver pciehp loaded
[ 4.113998] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 2940 ss_vid 17aa ss_did 20f3
[ 4.114026] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[ 4.114041] pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 2944 ss_vid 17aa ss_did 20f3
[ 4.114070] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
[ 4.114084] pciehp 0000:00:1c.3:pcie04: HPC vendor_id 8086 device_id 2946 ss_vid 17aa ss_did 20f3
[ 4.114110] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded
[ 4.114124] pciehp 0000:00:1c.4:pcie04: HPC vendor_id 8086 device_id 2948 ss_vid 17aa ss_did 20f3
[ 4.114152] pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded
[ 4.114158] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 4.114223] intel_idle: does not run on family 6 model 23
[ 4.114231] ipmi message handler version 39.2
[ 4.114549] ACPI: AC Adapter [AC] (on-line)
[ 4.114627] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 4.114951] ACPI: Lid Switch [LID]
[ 4.114991] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 4.114995] ACPI: Sleep Button [SLPB]
[ 4.115056] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 4.115059] ACPI: Power Button [PWRF]
[ 4.116616] Monitor-Mwait will be used to enter C-1 state
[ 4.116621] Monitor-Mwait will be used to enter C-2 state
[ 4.116624] tsc: Marking TSC unstable due to TSC halts in idle
[ 4.116628] ACPI: acpi_idle registered with cpuidle
[ 4.118600] thermal LNXTHERM:00: registered as thermal_zone0
[ 4.118603] ACPI: Thermal Zone [THM0] (67 C)
[ 4.120046] thermal LNXTHERM:01: registered as thermal_zone1
[ 4.120048] ACPI: Thermal Zone [THM1] (65 C)
[ 4.120079] GHES: HEST is not enabled!
[ 4.120142] isapnp: Scanning for PnP cards...
[ 4.120194] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 4.120303] serial 00:09: [io 0x03f8-0x03ff]
[ 4.120368] serial 00:09: [irq 4]
[ 4.120605] serial 00:09: activated
[ 4.141076] 00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 4.162804] 0000:00:03.3: ttyS4 at I/O 0x1828 (irq = 17, base_baud = 115200) is a 16550A
[ 4.163025] Linux agpgart interface v0.103
[ 4.164590] brd: module loaded
[ 4.165334] loop: module loaded
[ 4.165849] libphy: Fixed MDIO Bus: probed
[ 4.165980] tun: Universal TUN/TAP device driver, 1.6
[ 4.165982] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 4.166019] PPP generic driver version 2.4.2
[ 4.166057] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.166060] ehci-pci: EHCI PCI platform driver
[ 4.166161] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 4.166168] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 4.166183] ehci-pci 0000:00:1a.7: debug port 1
[ 4.170099] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 4.170116] ehci-pci 0000:00:1a.7: irq 23, io mem 0xfc226c00
[ 4.180036] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 4.180101] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.180104] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.180106] usb usb1: Product: EHCI Host Controller
[ 4.180108] usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
[ 4.180110] usb usb1: SerialNumber: 0000:00:1a.7
[ 4.180216] hub 1-0:1.0: USB hub found
[ 4.180225] hub 1-0:1.0: 6 ports detected
[ 4.180578] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 4.180583] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 4.180597] ehci-pci 0000:00:1d.7: debug port 1
[ 4.184504] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 4.184521] ehci-pci 0000:00:1d.7: irq 19, io mem 0xfc227000
[ 4.188102] ACPI: Battery Slot [BAT0] (battery present)
[ 4.196023] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 4.196057] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.196060] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.196062] usb usb2: Product: EHCI Host Controller
[ 4.196064] usb usb2: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
[ 4.196066] usb usb2: SerialNumber: 0000:00:1d.7
[ 4.196153] hub 2-0:1.0: USB hub found
[ 4.196160] hub 2-0:1.0: 6 ports detected
[ 4.196415] ehci-platform: EHCI generic platform driver
[ 4.196424] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.196426] ohci-pci: OHCI PCI platform driver
[ 4.196441] ohci-platform: OHCI generic platform driver
[ 4.196449] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.196533] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 4.196538] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 4.196575] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
[ 4.196625] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.196627] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.196629] usb usb3: Product: UHCI Host Controller
[ 4.196631] usb usb3: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[ 4.196633] usb usb3: SerialNumber: 0000:00:1a.0
[ 4.196721] hub 3-0:1.0: USB hub found
[ 4.196729] hub 3-0:1.0: 2 ports detected
[ 4.196914] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 4.196920] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 4.196958] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
[ 4.197005] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.197007] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.197009] usb usb4: Product: UHCI Host Controller
[ 4.197011] usb usb4: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[ 4.197013] usb usb4: SerialNumber: 0000:00:1a.1
[ 4.197102] hub 4-0:1.0: USB hub found
[ 4.197108] hub 4-0:1.0: 2 ports detected
[ 4.197290] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 4.197294] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 4.197331] uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0
[ 4.197379] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.197382] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.197384] usb usb5: Product: UHCI Host Controller
[ 4.197386] usb usb5: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[ 4.197388] usb usb5: SerialNumber: 0000:00:1a.2
[ 4.197475] hub 5-0:1.0: USB hub found
[ 4.197483] hub 5-0:1.0: 2 ports detected
[ 4.197670] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.197675] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 4.197714] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0
[ 4.197761] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.197763] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.197765] usb usb6: Product: UHCI Host Controller
[ 4.197767] usb usb6: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[ 4.197769] usb usb6: SerialNumber: 0000:00:1d.0
[ 4.197867] hub 6-0:1.0: USB hub found
[ 4.197877] hub 6-0:1.0: 2 ports detected
[ 4.198059] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.198063] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 4.198100] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0
[ 4.198147] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.198149] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.198151] usb usb7: Product: UHCI Host Controller
[ 4.198153] usb usb7: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[ 4.198155] usb usb7: SerialNumber: 0000:00:1d.1
[ 4.198243] hub 7-0:1.0: USB hub found
[ 4.198249] hub 7-0:1.0: 2 ports detected
[ 4.198429] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.198434] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 4.198474] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00
[ 4.198520] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.198522] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.198525] usb usb8: Product: UHCI Host Controller
[ 4.198527] usb usb8: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[ 4.198529] usb usb8: SerialNumber: 0000:00:1d.2
[ 4.198614] hub 8-0:1.0: USB hub found
[ 4.198620] hub 8-0:1.0: 2 ports detected
[ 4.198799] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 4.207956] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.207961] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.208070] mousedev: PS/2 mouse device common for all mice
[ 4.208208] rtc_cmos 00:06: RTC can wake from S4
[ 4.208330] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 4.208359] rtc_cmos 00:06: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 4.208423] device-mapper: uevent: version 1.0.3
[ 4.208478] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 4.208498] platform eisa.0: Probing EISA bus 0
[ 4.208502] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 4.208505] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 4.208507] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 4.208510] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 4.208512] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 4.208515] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 4.208517] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 4.208519] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 4.208522] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 4.208524] platform eisa.0: EISA: Detected 0 cards
[ 4.208530] cpufreq-nforce2: No nForce2 chipset.
[ 4.208533] ledtrig-cpu: registered to indicate activity on CPUs
[ 4.208670] TCP: cubic registered
[ 4.208777] NET: Registered protocol family 10
[ 4.208979] NET: Registered protocol family 17
[ 4.208987] Key type dns_resolver registered
[ 4.209193] Using IPI No-Shortcut mode
[ 4.209260] Loading compiled-in X.509 certificates
[ 4.212643] Loaded X.509 cert 'Magrathea: Glacier signing key: 77d70e1df42996dc92b01d759d3e8562ea32a1c7'
[ 4.212654] registered taskstats version 1
[ 4.215187] Key type trusted registered
[ 4.215983] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 4.217414] Key type encrypted registered
[ 4.219123] AppArmor: AppArmor sha1 policy hashing enabled
[ 4.219126] IMA: No TPM chip found, activating TPM-bypass!
[ 4.219500] regulator-dummy: disabling
[ 4.219538] Magic number: 10:879:445
[ 4.219602] rtc_cmos 00:06: setting system clock to 2014-04-20 19:24:41 UTC (1398021881)
[ 4.221194] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 4.221195] EDD information not available.
[ 4.221262] PM: Hibernation image not present or could not be loaded.
[ 4.474867] isapnp: No Plug & Play device found
[ 4.475247] Freeing unused kernel memory: 872K (c19ae000 - c1a88000)
[ 4.475291] Write protecting the kernel text: 6512k
[ 4.475374] Write protecting the kernel read-only data: 2756k
[ 4.475375] NX-protecting the kernel data: 5776k
[ 4.488604] systemd-udevd[96]: starting version 204
[ 4.492037] usb 1-5: new high-speed USB device number 2 using ehci-pci
[ 4.512477] pps_core: LinuxPPS API ver. 1 registered
[ 4.512480] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 4.516407] PTP clock support registered
[ 4.528124] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 4.528126] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 4.528320] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 4.528345] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 4.529242] [drm] Initialized drm 1.1.0 20060810
[ 4.529566] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
[ 4.533082] acpi device:08: registered as cooling_device2
[ 4.533155] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:07/LNXVIDEO:01/input/input5
[ 4.549112] wmi: Mapper loaded
[ 4.589137] sdhci: Secure Digital Host Controller Interface driver
[ 4.589140] sdhci: Copyright(c) Pierre Ossman
[ 4.593354] sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21)
[ 4.594431] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[ 4.594437] sdhci-pci 0000:15:00.2: dummy supplies not allowed
[ 4.594439] mmc0: no vqmmc regulator found
[ 4.594441] sdhci-pci 0000:15:00.2: dummy supplies not allowed
[ 4.594442] mmc0: no vmmc regulator found
[ 4.595439] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[ 4.595502] mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA
[ 4.604912] [drm] radeon kernel modesetting enabled.
[ 4.605292] [drm] initializing kernel modesetting (RV635 0x1002:0x9591 0x17AA:0x2117).
[ 4.605309] [drm] register mmio base: 0xCFFF0000
[ 4.605310] [drm] register mmio size: 65536
[ 4.605422] ATOM BIOS: M86M
[ 4.605446] radeon 0000:01:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
[ 4.605449] radeon 0000:01:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
[ 4.605450] [drm] Detected VRAM RAM=256M, BAR=256M
[ 4.605452] [drm] RAM width 128bits DDR
[ 4.605492] [TTM] Zone kernel: Available graphics memory: 404700 kiB
[ 4.605494] [TTM] Zone highmem: Available graphics memory: 4106676 kiB
[ 4.605495] [TTM] Initializing pool allocator
[ 4.605499] [TTM] Initializing DMA pool allocator
[ 4.605514] [drm] radeon: 256M of VRAM memory ready
[ 4.605516] [drm] radeon: 512M of GTT memory ready.
[ 4.605525] [drm] Loading RV635 Microcode
[ 4.605578] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 4.615784] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 4.615821] radeon 0000:01:00.0: WB enabled
[ 4.615825] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000010000c00 and cpu addr 0xffc13c00
[ 4.615827] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000010000c0c and cpu addr 0xffc13c0c
[ 4.615829] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.615831] [drm] Driver supports precise vblank timestamp query.
[ 4.615852] radeon 0000:01:00.0: irq 46 for MSI/MSI-X
[ 4.615863] radeon 0000:01:00.0: radeon: using MSI.
[ 4.615890] [drm] radeon: irq initialized.
[ 4.624411] usb 1-5: New USB device found, idVendor=04b3, idProduct=4485
[ 4.624414] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.639939] hub 1-5:1.0: USB hub found
[ 4.640032] hub 1-5:1.0: 4 ports detected
[ 4.660623] [drm] ring test on 0 succeeded in 1 usecs
[ 4.660682] [drm] ring test on 3 succeeded in 1 usecs
[ 4.660833] [drm] Enabling audio 0 support
[ 4.660851] [drm] ib test on ring 0 succeeded in 0 usecs
[ 4.660867] [drm] ib test on ring 3 succeeded in 0 usecs
[ 4.665447] [drm] radeon atom DIG backlight initialized
[ 4.665450] [drm] Radeon Display Connectors
[ 4.665452] [drm] Connector 0:
[ 4.665453] [drm] DVI-I-1
[ 4.665454] [drm] HPD3
[ 4.665457] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[ 4.665458] [drm] Encoders:
[ 4.665459] [drm] DFP1: INTERNAL_UNIPHY
[ 4.665461] [drm] Connector 1:
[ 4.665462] [drm] LVDS-1
[ 4.665464] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 4.665465] [drm] Encoders:
[ 4.665466] [drm] LCD1: INTERNAL_KLDSCP_LVTMA
[ 4.665468] [drm] Connector 2:
[ 4.665469] [drm] DP-1
[ 4.665470] [drm] HPD1
[ 4.665472] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[ 4.665473] [drm] Encoders:
[ 4.665474] [drm] DFP2: INTERNAL_UNIPHY
[ 4.665476] [drm] Connector 3:
[ 4.665477] [drm] VGA-1
[ 4.665479] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 4.665480] [drm] Encoders:
[ 4.665481] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 4.665581] [drm] radeon: power management initialized
[ 4.668108] firewire_ohci 0000:15:00.1: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x11
[ 4.752035] usb 2-3: new high-speed USB device number 2 using ehci-pci
[ 4.772507] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:27:13
e6:89
[ 4.772510] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 4.772536] e1000e 0000:00:19.0 eth0: MAC: 7, PHY: 8, PBA No: 1008FF-0FF
[ 4.772562] ahci 0000:00:1f.2: version 3.0
[ 4.772713] ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
[ 4.772759] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 4.772785] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 4.772788] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc sxs
[ 4.773370] scsi0 : ahci
[ 4.773453] scsi1 : ahci
[ 4.773519] scsi2 : ahci
[ 4.773587] scsi3 : ahci
[ 4.773634] ata1: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226100 irq 47
[ 4.773637] ata2: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226180 irq 47
[ 4.773638] ata3: DUMMY
[ 4.773640] ata4: DUMMY
[ 4.886702] usb 2-3: New USB device found, idVendor=07ca, idProduct=a310
[ 4.886706] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.886710] usb 2-3: Product: A310
[ 4.886713] usb 2-3: Manufacturer: AVerMedia
[ 4.886716] usb 2-3: SerialNumber: 000000000000
[ 4.972179] usb 1-5.1: new full-speed USB device number 3 using ehci-pci
[ 5.068061] usb 1-5.1: New USB device found, idVendor=045e, idProduct=0291
[ 5.068066] usb 1-5.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.092054] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.092795] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 5.092800] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 5.092804] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 5.093064] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 5.093066] ata1.00: ATA-9: Samsung SSD 840 PRO Series, DXM06B0Q, max UDMA/133
[ 5.093069] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 5.093397] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 5.093403] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 5.093407] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 5.093656] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 5.093659] ata1.00: configured for UDMA/133
[ 5.093801] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 DXM0 PQ: 0 ANSI: 5
[ 5.093947] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 5.093969] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.094033] sd 0:0:0:0: [sda] Write Protect is off
[ 5.094036] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.094055] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.094532] sda: sda1 sda2
[ 5.094800] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.156187] usb 1-5.2: new full-speed USB device number 4 using ehci-pci
[ 5.168122] firewire_core 0000:15:00.1: created device fw0: GUID 00061b032a54af54, S400
[ 5.251913] usb 1-5.2: New USB device found, idVendor=046d, idProduct=c068
[ 5.251916] usb 1-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.251918] usb 1-5.2: Product: G500
[ 5.251920] usb 1-5.2: Manufacturer: Logitech
[ 5.251922] usb 1-5.2: SerialNumber: 1009F490BF0018
[ 5.260099] hidraw: raw HID events driver (C) Jiri Kosina
[ 5.271159] usbcore: registered new interface driver usbhid
[ 5.271161] usbhid: USB HID core driver
[ 5.275358] input: Logitech G500 as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.2/1-5.2:1.0/input/input6
[ 5.275516] hid-generic 0003:046D:C068.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech G500] on usb-0000:00:1a.7-5.2/input0
[ 5.277813] input: Logitech G500 as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.2/1-5.2:1.1/input/input7
[ 5.278330] hid-generic 0003:046D:C068.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech G500] on usb-0000:00:1a.7-5.2/input1
[ 5.332180] usb 1-5.3: new high-speed USB device number 5 using ehci-pci
[ 5.412042] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.417376] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 5.418490] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 5.418495] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 5.422625] ata2.00: ATAPI: HL-DT-ST DVDRAM GU10N, MX05, max UDMA/133
[ 5.429484] ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 (IDLE) succeeded
[ 5.430490] ata2.00: ACPI cmd e3/00:02:00:00:00:a0 (IDLE) succeeded
[ 5.430495] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 5.434520] ata2.00: configured for UDMA/133
[ 5.440231] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GU10N MX05 PQ: 0 ANSI: 5
[ 5.443902] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.443910] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 5.444012] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.444070] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.444659] usb 1-5.3: New USB device found, idVendor=041e, idProduct=4083
[ 5.444666] usb 1-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.444668] usb 1-5.3: Product: VF0640 Live! Cam Socialize
[ 5.444670] usb 1-5.3: Manufacturer: Creative Labs
[ 5.444672] usb 1-5.3: SerialNumber: 1H010334
[ 5.532167] usb 1-5.4: new full-speed USB device number 6 using ehci-pci
[ 5.563839] [drm] fb mappable at 0xD0141000
[ 5.563841] [drm] vram apper at 0xD0000000
[ 5.563843] [drm] size 9216000
[ 5.563844] [drm] fb depth is 24
[ 5.563845] [drm] pitch is 7680
[ 5.563911] fbcon: radeondrmfb (fb0) is primary device
[ 5.628427] usb 1-5.4: New USB device found, idVendor=046d, idProduct=c318
[ 5.628430] usb 1-5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.628432] usb 1-5.4: Product: Logitech Illuminated Keyboard
[ 5.628434] usb 1-5.4: Manufacturer: Logitech
[ 5.631361] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.4/1-5.4:1.0/input/input8
[ 5.631459] hid-generic 0003:046D:C318.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1a.7-5.4/input0
[ 5.634043] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.4/1-5.4:1.1/input/input9
[ 5.634150] hid-generic 0003:046D:C318.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1a.7-5.4/input1
[ 5.836258] Console: switching to colour frame buffer device 240x67
[ 5.844323] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 5.844325] radeon 0000:01:00.0: registered panic notifier
[ 5.844338] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0
[ 8.509272] random: nonblocking pool is initialized
[ 9.234636] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 9.281333] ISO 9660 Extensions: RRIP_1991A
[ 9.981115] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 72.154917] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 74.581271] systemd-udevd[1055]: starting version 204
[ 85.115637] parport_pc 00:0a: [io 0x03bc-0x03be]
[ 85.115714] parport_pc 00:0a: [irq 7]
[ 85.116157] parport_pc 00:0a: activated
[ 85.116161] parport_pc 00:0a: reported by Plug and Play ACPI
[ 85.116255] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
[ 85.309421] lp0: using parport0 (interrupt-driven).
[ 85.317716] Bluetooth: Core ver 2.17
[ 85.317732] NET: Registered protocol family 31
[ 85.317734] Bluetooth: HCI device and connection manager initialized
[ 85.317741] Bluetooth: HCI socket layer initialized
[ 85.317744] Bluetooth: L2CAP socket layer initialized
[ 85.317749] Bluetooth: SCO socket layer initialized
[ 85.935059] ppdev: user-space parallel port driver
[ 86.429425] Bluetooth: RFCOMM TTY layer initialized
[ 86.429435] Bluetooth: RFCOMM socket layer initialized
[ 86.429440] Bluetooth: RFCOMM ver 1.11
[ 87.248572] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 87.248576] Bluetooth: BNEP filters: protocol multicast
[ 87.248584] Bluetooth: BNEP socket layer initialized
[ 90.112038] ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \_SB_.PCI0.LPC_.PMIO 1 (20131115/utaddress-251)
[ 90.112045] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 90.112050] ACPI Warning: 0x000011b0-0x000011bf SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20131115/utaddress-251)
[ 90.112053] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 90.112055] ACPI Warning: 0x00001180-0x000011af SystemIO conflicts with Region \_SB_.PCI0.LPC_.LPIO 1 (20131115/utaddress-251)
[ 90.112058] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 90.112060] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 90.413591] cfg80211: Calling CRDA to update world regulatory domain
[ 91.137516] mei_me 0000:00:03.0: irq 48 for MSI/MSI-X
[ 91.839381] Non-volatile memory driver v1.3
[ 92.933548] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 92.933551] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 92.933552] thinkpad_acpi: ThinkPad BIOS 6FET93WW (3.23 ), EC 7VHT16WW-1.06
[ 92.933554] thinkpad_acpi: Lenovo ThinkPad T500, model 2055B46
[ 92.956857] thinkpad_acpi: detected a 16-level brightness capable ThinkPad
[ 92.956998] thinkpad_acpi: radio switch found; radios are disabled
[ 92.957010] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 92.957011] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 92.959646] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked
[ 92.962095] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is blocked
[ 92.964426] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 92.964539] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 92.966068] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input10
[ 93.880332] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 93.880336] Copyright(c) 2003-2013 Intel Corporation
[ 93.880448] iwlwifi 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 93.880508] iwlwifi 0000:04:00.0: irq 49 for MSI/MSI-X
[ 93.881560] iwlwifi 0000:04:00.0: Direct firmware load failed with error -2
[ 93.881563] iwlwifi 0000:04:00.0: Falling back to user helper
[ 96.827870] Linux video capture interface: v2.00
[ 98.063858] device-mapper: multipath: version 1.6.0 loaded
[ 98.081366] usbcore: registered new interface driver snd-usb-audio
[ 98.950481] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[ 99.112192] r592: driver successfully loaded
[ 99.239899] input: Xbox 360 Wireless Receiver (XBOX) as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.1/1-5.1:1.0/input/input11
[ 99.240212] input: Xbox 360 Wireless Receiver (XBOX) as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.1/1-5.1:1.2/input/input12
[ 99.240426] input: Xbox 360 Wireless Receiver (XBOX) as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.1/1-5.1:1.4/input/input13
[ 99.240633] input: Xbox 360 Wireless Receiver (XBOX) as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.1/1-5.1:1.6/input/input14
[ 99.240796] usbcore: registered new interface driver xpad
[ 99.543188] hda_codec: CX20561 (Hermosa): BIOS auto-probing.
[ 99.543616] autoconfig: line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:speaker
[ 99.543618] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 99.543619] hp_outs=2 (0x19/0x16/0x0/0x0/0x0)
[ 99.543621] mono: mono_out=0x0
[ 99.543622] dig-out=0x1c/0x0
[ 99.543623] inputs:
[ 99.543625] Mic=0x18
[ 99.543627] Internal Mic=0x1d
[ 99.543628] Dock Mic=0x17
[ 99.544766] hda_codec: Enable sync_write for stable communication
[ 99.546926] autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
[ 99.546928] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 99.546930] hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 99.546931] mono: mono_out=0x0
[ 99.546933] inputs:
[ 99.549862] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 99.549939] input: HDA Intel Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 99.549999] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 99.550058] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 100.573730] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6]
[ 100.700717] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0c38, PCI irq 16
[ 100.700722] yenta_cardbus 0000:15:00.0: Socket status: 30000006
[ 100.700727] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io 0x5000-0x8fff]
[ 100.700730] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x5000-0x8fff:
[ 100.702531] excluding 0x5000-0x50ff 0x5400-0x54ff
[ 100.732471] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf4300000-0xf7ffffff]
[ 100.732475] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf4300000-0xf7ffffff:
[ 100.732477] excluding 0xf4300000-0xf46cffff
[ 100.732489] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf0000000-0xf3ffffff 64bit pref]
[ 100.732492] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf0000000-0xf3ffffff:
[ 100.732504] excluding 0xf0000000-0xf3ffffff
[ 101.542453] iwlwifi 0000:04:00.0: Direct firmware load failed with error -2
[ 101.542457] iwlwifi 0000:04:00.0: Falling back to user helper
[ 102.258164] kvm: disabled by bios
[ 102.289075] kvm: disabled by bios
[ 103.162860] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04791/0xb00000/0x20000, board id: 71, fw id: 434116
[ 103.162870] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 103.208571] usb 2-3: dvb_usb_v2: found a 'AVerMedia A310 USB 2.0 DVB-T tuner' in warm state
[ 103.217607] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input19
[ 103.219663] usb 2-3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 103.219707] DVB: registering new adapter (AVerMedia A310 USB 2.0 DVB-T tuner)
[ 104.321999] init: failsafe main process (1299) killed by TERM signal
[ 104.664901] uvcvideo: Found UVC 1.00 device VF0640 Live! Cam Socialize (041e:4083)
[ 104.667344] input: VF0640 Live! Cam Socialize as /devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5.3/1-5.3:1.0/input/input21
[ 104.667736] usbcore: registered new interface driver uvcvideo
[ 104.667738] USB Video Class driver (1.1.1)
[ 106.480641] iwlwifi 0000:04:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
[ 106.492846] usb 2-3: DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)...
[ 106.752675] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[ 107.467882] r852: driver loaded successfully
[ 108.235291] cfg80211: World regulatory domain updated:
[ 108.235295] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 108.235297] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 108.235299] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 108.235301] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 108.235302] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 108.235304] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 108.341607] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 108.586792] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input20
[ 109.501939] MXL5005S: Attached at address 0xc6
[ 109.502247] usb 2-3: dvb_usb_v2: 'AVerMedia A310 USB 2.0 DVB-T tuner' successfully initialized and connected
[ 109.502281] usbcore: registered new interface driver dvb_usb_ce6230
[ 114.599254] iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 114.599259] iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[ 114.599261] iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 114.599264] iwlwifi 0000:04:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
[ 114.599336] iwlwifi 0000:04:00.0: L1 Disabled; Enabling L0S
[ 114.605981] iwlwifi 0000:04:00.0: RF_KILL bit toggled to disable radio.
[ 115.834144] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 118.028270] init: alsa-restore main process (1759) terminated with status 99
[ 119.059696] zram: module is from the staging directory, the quality is unknown, you have been warned.
[ 119.064164] zram: Created 2 device(s) ...
[ 122.871894] Adding 2053336k swap on /dev/zram0. Priority:5 extents:1 across:2053336k SSFS
[ 122.880240] Adding 2053336k swap on /dev/zram1. Priority:5 extents:1 across:2053336k SSFS
[ 129.454249] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 129.556079] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
[ 129.556201] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 129.556486] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 129.558221] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 132.660899] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 132.661037] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 146.057892] init: plymouth-upstart-bridge main process ended, respawning
[ 434.861022] xor: measuring software checksum speed
[ 434.900012] pIII_sse : 9478.000 MB/sec
[ 434.940011] prefetch64-sse: 6813.000 MB/sec
[ 434.940014] xor: using function: pIII_sse (9478.000 MB/sec)
[ 435.252011] raid6: mmxx1 3223 MB/s
[ 435.320013] raid6: mmxx2 3654 MB/s
[ 435.388013] raid6: sse1x1 2102 MB/s
[ 435.456026] raid6: sse1x2 2775 MB/s
[ 435.524017] raid6: sse2x1 3813 MB/s
[ 435.592009] raid6: sse2x2 4334 MB/s
[ 435.592011] raid6: using algorithm sse2x2 (4334 MB/s)
[ 435.592012] raid6: using ssse3x1 recovery algorithm
[ 435.970394] bio: create slab <bio-1> at 1
[ 435.971289] Btrfs loaded
[ 436.113869] JFS: nTxBlock = 8192, nTxLock = 65536
[ 436.502665] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 450.824652] NTFS driver 2.1.30 [Flags: R/O MODULE].
[ 451.625321] QNX4 filesystem 0.2.3 registered.
[ 499.372091] usb 1-1: new high-speed USB device number 7 using ehci-pci
[ 499.504914] usb 1-1: New USB device found, idVendor=0781, idProduct=556b
[ 499.504924] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 499.504931] usb 1-1: Product: Cruzer Edge
[ 499.504938] usb 1-1: Manufacturer: SanDisk
[ 499.504944] usb 1-1: SerialNumber: 2006016442192631BC3F
[ 500.812323] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 500.812378] scsi4 : usb-storage 1-1:1.0
[ 500.812449] usbcore: registered new interface driver usb-storage
[ 501.813248] scsi 4:0:0:0: Direct-Access SanDisk Cruzer Edge 1.20 PQ: 0 ANSI: 5
[ 501.813850] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 501.820947] sd 4:0:0:0: [sdb] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 501.822462] sd 4:0:0:0: [sdb] Write Protect is off
[ 501.822468] sd 4:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 501.823946] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 501.832511] sdb: sdb1
[ 501.836206] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 712.954250] perf samples too long (2506 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
lubuntu@lubuntu:/proc$
Schick. WWAN sollte ich mir auch endlich mal für mein T400 besorgen. RNDIS via USB nervt doch auf Dauer.
Sehe auch gerade, das der Serialport in der Dockingstation per USB angebunden wird.. Schade eigentlich, dachte das wäre eine native Schnittstelle. Außer, die meinen bei lsusb mit serial etwas anderes.
Du hast noch kein Benutzerkonto auf unserer Seite? Registriere dich kostenlos und nimm an unserer Community teil!
